How to make electronic assistans for DIY* campers
based on non-specialized equipment
that you can buy at amazon, aliexpress, etc.
or that you already have.
Step by step,
not necessarily all together, but as needed.
collect data from sensors, cameras and distribute them when there is Internet or not
view/record what is viewed inside and/or around the camper at parking lot or while driving
view/record what is viewed inside and/or around the camper at parking lot or while driving
view/record what is viewed inside and/or around the camper at parking lot or while driving
for the camper's media server, utilizes an old PAD
connects to a (weak) public AP that has or does not have a Captive portal, and gives an Internet connection to the camper's router
Connect a wired and Wi-Fi equipment in the camper, makes a strong AP that can be accessed at a long distance
the center of automation - controls sensors, manage actuators, shows parameters, run a virtual assistant, runs scripts
send to a phone alarm signs of detectors that may be mechanical for reliability reasons, such as LPG and CO detectors
the visual and audio beacon will be activated automatically or by command if any emergency event occurs
the warning siren will turn on by command if some dangerous events occur
automatic balancing of the trailer when driving by pumping water between tanks
manually using the smartphone app
what makes adding or removing devices easy
to turn on the power supply for a boiler that has no controller and has an internal thermostat, or for a thermostat that controls the boiler, or for a boiler with some programming interface; and to turn off manually or by timer or by parameters
to turn on the electricity for the air heater that has no controller and has an internal thermostat, or for the thermostat that controls the heater, or for the heater with some programming interface; and to turn off manually or by timer or by parameters
to turn on the power for an air conditioner that does not have any controller, or has an IR controller, or that has a software interface; and to turn off manually or by time or by parameters
to turn on/off electricity for fans manually or by timer or by CO2 sensor parameters
to turn on the power supply of the freezer control thermostat, and to turn off manually or by time or by parameters
monitor the service battery voltage with a graph of the outcome and discharge forecast
provide monitoring of the voltage of the car battery, with the graph of the outcome
provide monitoring of the level of the white water tank
provide monitoring of the level of the waste water tank with a prognosis of an outfilling
provides controller functions for solar panels
specify the internal and external temperature, humidity, air pressure
by means of SMS signals about opening of doors
to alert when the camper is on the edge of a collision while parking. Especially for campers on the basis of the trailer. Easy installation
for strong night visual observation inside and/or around the camper. Spotlights can be turned on/off by script to save energy of the camper
A software you can load here is free for a non-commercial use except for components for which their owners declared their own rights. Can be limited by local laws. All your data will be stored only locally with a software you can load here.
Get updates